Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Cbr 600f
Part: Engine oil

This guide will show you the steps to perform routine maintenance by replacing the engine oil and oil filter on a Honda CBR 600f. First, place your bike on a stand and start by removing the lower plastic fairing; then unscrew the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes, as shown in the video. At this point, unscrew the oil filter cartridge and replace it with a new one; finally, unscrew the filler cap and pour in the new oil!

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the air filter of the Honda CBR 600F?
How do you replace the air filter of the Honda CBR 600F?
Cbr 600f In order to replace the air filter of the Honda CBR 600F, you need to loosen the screws that secure the side panel located on the left side of the mo…
Replacing the Air Filter on a Honda CBR 600F (2002)
Replacing the Air Filter on a Honda CBR 600F (2002)
Cbr 600f Let’s briefly see how to remove and replace the engine air filter on a 2002 Honda CBR 600F in simple and quick steps. First, remove the seat from you…
How to change the engine oil in the Honda CBR 600 F4i?
How to change the engine oil in the Honda CBR 600 F4i?
Cbr 600f To change the engine oil in the Honda CBR 600 F4i, loosen the screws securing the engine block protection plate, located on both sides of the bike. O…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos