Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Cbr 600f
Part: Engine oil

To change the engine oil in the Honda CBR 600 F4i, loosen the screws securing the engine block protection plate, located on both sides of the bike. Once these screws are loosened, you can detach this panel and loosen the drain plug underneath: this way, all the used oil that is expelled can be collected in a suitably placed container. You can then top up by pouring oil through the breather located on the right side of the engine casing: by adding the necessary amount of oil, you can complete the operation by refitting all the panels.

Updated on 28 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Wheel on a Honda CBR 600 F4i
How to Replace the Rear Wheel on a Honda CBR 600 F4i
Cbr 600f To replace the rear wheel on a Honda CBR F4i, loosen the central nut that secures the wheel spindle so that it can be released. Before completely rem…
How do you replace the battery of the Honda CBR 600?
How do you replace the battery of the Honda CBR 600?
Cbr 600f In order to replace the battery of the Honda CBR 600, you need to loosen the screws that secure the seat to its housing, so that it is possible to pr…
Replacing the Engine Oil and Oil Filter on a Honda CBR 600f
Replacing the Engine Oil and Oil Filter on a Honda CBR 600f
Cbr 600f This guide will show you the steps to perform routine maintenance by replacing the engine oil and oil filter on a Honda CBR 600f. First, place your b…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos