Do it yourself
| ||||
|
Model: Honda Cbr 600f
In order to replace the rear wheel of the Honda CBR F4i it is necessary to loosen the central nut that fixes the central pin of the wheel, so that this can be released. Before removing it completely, it will in any case be necessary to move the chain from its toothed wheel; in addition, the bolts that secure the brake caliper corresponding to the rear disc must be unscrewed, removing it completely. At this point the wheel can be completely removed and it will be possible to replace it with a new one: this must be suitably fixed by installing the pin and fixing it with its nut.
Posted on 30 June 2022 by ScegliAuto
|
How do you replace the clutch on the Ducati Monster 620?The replacement of the clutch of the Ducati Monster 620 is carried out by loosening the bolts that secure the casing located on the right side of the bike, in correspondence with its crank arm. Once these bolts have been loosened, it will be possible to detach the crankcase cover to access the components below; by unscrewing the bolts that secure the clutch discs, it will be possible to extract them all from their housing, so that the new spare parts can be inserted. After installing the new clutch, it will be possible to secure it with bolts and also seal the crankcase cover. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.004
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |