Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Cbr 150
Part: Brake pads

This guide provides the main instructions for removing and replacing the rear brake pads of the Honda CBR 150R motorcycle. First, remove the rear wheel; to do this, unscrew the central nut of the wheel axle, then disconnect the chain, as shown in the video. Next, unscrew the screws of the brake caliper and then remove the brake pads. Clean the caliper from dirt and push the piston back in. Then, install the new brake pads and reassemble the caliper and rear wheel!

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the rear brake pads of the Honda CBR 150R?
How do you replace the rear brake pads of the Honda CBR 150R?
Cbr 150 To replace the rear brake pads of the Honda CBR 150R, you will need to loosen the screws that secure the brake caliper to the corresponding disc so t…
How to Replace the Battery on a Honda CBR 150R
How to Replace the Battery on a Honda CBR 150R
Cbr 150 To replace the battery on a Honda CBR 150R, insert the key into the side lock to unlock the rear part of the seat: once this part is removed, you can…
How to Set the Clock on a Honda CBR 150R?
How to Set the Clock on a Honda CBR 150R?
Cbr 150 To set the clock on a Honda CBR 150R, turn on the instrument cluster by inserting the ignition key into the ignition switch: once the display is on, …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos