Do it yourself
Frequently asked questions about cars and motorcycles

Model: Honda Nc 750 X
Part: Engine oil

This brief guide shows you how to replace the engine oil and oil filter on the Honda NC750 X motorcycle in simple steps. First, place the bike on its stand and start by loosening the oil drain bolt located under the engine, allowing the oil to drain into a container for about ten minutes; then, remove the oil filter cartridge and replace it with a new one, as shown in the video. At this point, remove the filler cap and pour in the new engine oil (in this case, a 10w30), following the video until the end!

Updated on 14 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Nc 750 X In this guide, discover how to change the engine oil and oil filter as part of the regular maintenance service on the Honda NC 750X motorcycle. First…
Nc 750 X The instructions in this guide will show you how to disassemble and replace the front brake pads on the Honda NC 750 X. First, place the motorcycle o…
Nc 750 X This guide explains the procedure for changing the brake fluid on a Honda NC 750X, following these simple steps. First, remove the cover of the brake…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos