Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda X Adv
Part: Battery

This guide will illustrate the procedure for replacing the battery for the Honda X-ADV 750 from 2018 onwards. Follow these steps: 1. Move the switch on the left handlebar to the "Seat" position; 2. Lift the seat and remove the various seals and plastic supports underneath; 3. Using a plastic tool and a spanner, remove the remaining screws and pins while applying slight pressure during the leverage, without forcing excessively; 4. Unscrew the last screws for the positive and negative terminals and the strap holding the battery in place; 5. Pull out the battery to be replaced; 6. Ensure the new replacement battery has the same voltage and amperage to avoid electrical issues; 7. Reassemble everything by reversing the steps just described.

Updated on 23 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the Battery Located in the Honda X-ADV 750?
Where is the Battery Located in the Honda X-ADV 750?
X Adv This guide shows the location of the battery in the Honda X-ADV 750. To access the battery compartment, open the storage area under the seat and remo…
Replacing the Battery on Honda X Adv 750
Replacing the Battery on Honda X Adv 750
X Adv To remove the battery on the Honda X Adv 750, first access the under-seat compartment, clear it of any items, and remove the lower cover. Now, using …
How to replace the battery in the Honda X-ADV 750 scooter?
How to replace the battery in the Honda X-ADV 750 scooter?
X Adv In this tutorial, we can see how to replace the battery in the Honda X-ADV 750 scooter, an extremely simple and quick operation. First of all, make s…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos