Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
As shown in this tutorial, replacing the front headlamp bulb on a Honda Activa scooter is a straightforward task. Start by removing the 5 screws securing the handlebar fairing using a cross-head screwdriver. Then, extract the entire block, disconnect the power connector, and remove the large circular plastic cap. At this point, unlock the metal clip of the bulb, pull it out of the housing, and fit the replacement by following the reverse procedure, avoiding direct contact with the glass using bare hands.

Updated on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Clock on a Honda Activa 125
How to Set the Clock on a Honda Activa 125
Activa In this brief and simple guide, we will outline the main steps to adjust the clock on the Honda Activa 125 scooter. First, place the scooter on its c…
How to Reset the Service Light of the Honda Activa 125
How to Reset the Service Light of the Honda Activa 125
Activa Below are the instructions and the procedure to reset the service light for the regular maintenance oil change of the Honda Activa 125 scooter. First…
How to Set the Clock on a Honda Activa?
How to Set the Clock on a Honda Activa?
Activa To set the clock on a Honda Activa, turn on the ignition by rotating the key in the ignition switch. At this point, press and hold the button located…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos