Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Activa
Part: Clock

To set the clock on a Honda Activa, turn on the ignition by rotating the key in the ignition switch. At this point, press and hold the button located to the right of the display until the hours start to flash. You can now change the hours with single presses of the same button; after adjusting the hours, press and hold the button again until the minutes start to flash. These can be modified in the same way, confirming the change by returning to the initial screen.

Updated on 9 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Clock on a Honda Activa 125
How to Set the Clock on a Honda Activa 125
Activa In this brief and simple guide, we will outline the main steps to adjust the clock on the Honda Activa 125 scooter. First, place the scooter on its c…
How to Replace the Front Headlamp Bulb on a Honda Activa Scooter?
How to Replace the Front Headlamp Bulb on a Honda Activa Scooter?
Activa As shown in this tutorial, replacing the front headlamp bulb on a Honda Activa scooter is a straightforward task. Start by removing the 5 screws secu…
How to Reset the Service Light of the Honda Activa 125
How to Reset the Service Light of the Honda Activa 125
Activa Below are the instructions and the procedure to reset the service light for the regular maintenance oil change of the Honda Activa 125 scooter. First…

How to Top Up the Oil in the Aprilia SR 50 R Scooter?

In this tutorial, you will see how to top up the oil in the Aprilia SR 50 R scooter, a very simple and quick operation to perform periodically. First, open the small lower compartment and retrieve the supplied tools, then remove the screws securing the front panel located at the back. Once removed, locate the oil reservoir, which is on your left, and unscrew the cap. At this point, proceed to top up the oil until you reach the optimal level, then reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos