Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Honda
    3. : Activa 3g
This guide shows how to change the engine oil on a Honda Activa 3G scooter. First, secure the scooter on its stand. Using a 14 mm spanner, unscrew the oil drain plug located on the right side of the scooter. Place a container for fluid disposal underneath. Next, clean any oil residue and refit the plug. Top up the reservoir with oil to the correct level and start the engine. Check the fluid level again and adjust it as necessary.

Updated on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light of the Honda Activa 125
How to Reset the Service Light of the Honda Activa 125
Activa Below are the instructions and the procedure to reset the service light for the regular maintenance oil change of the Honda Activa 125 scooter. First…
How to Perform an Oil Change on the Honda SH 300
How to Perform an Oil Change on the Honda SH 300
Sh 300i Discover the steps to perform the routine maintenance oil change on the Honda SH 300i scooter. First, position your scooter on the centre stand and s…
What does the "Oil change" indicator on the Honda PCX 160 scooter indicate?
What does the "Oil change" indicator on the Honda PCX 160 scooter indicate?
Pcx 160 If the "Oil change" light has turned on in the instrument panel of our Honda PCX 160 scooter, it means that it is time to change the oil as the inter…

How to Replace the Clutch on a Triumph Speed Triple?

To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing. This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings.

Watch the video!


by ScegliAuto

More videos