Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Bulb and Dashboard of the Honda SH 150

Model: Honda Sh 150
Part: Headlight bulb

Video tutorial

This guide shows the procedure for removing and replacing the bulb and dashboard for the 2013 Honda SH 150. Models of SH up to 2016 are suitable for this work. For this procedure, follow these steps: 1. Remove the visor by taking out its 4 nuts; 2. Remove the 6 nuts from the side covers, 3 for each, of which 4 of 6 are clips, take particular care when removing these; 3. Remove the 4 screws from the lower plastic cover beneath the handlebars; 4. Remove the remaining rubber parts and front fairings not mentioned earlier, then proceed to remove the bulb and, if necessary, replace the part.


Updated on 31 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a Honda SH 150 Scooter
How to Replace the Front Headlamp Bulb on a Honda SH 150 Scooter
Sh 150 Replacing the front headlamp bulb on a Honda SH 150 scooter is an extremely simple and quick task. First, ensure the key is not in the ignition. Then…
How to Replace the Position Bulb on Honda SH 150?
How to Replace the Position Bulb on Honda SH 150?
Sh 150 To replace the position bulb on a Honda SH 150, simply follow the easy steps shown in this video. Essentially, unscrew the two Allen screws located a…
How to Replace the Rear Light Bulb on a Honda SH 150?
How to Replace the Rear Light Bulb on a Honda SH 150?
Sh 150 To replace the rear light bulb on a Honda SH 150, loosen the screws securing the panel at the top of the rear mudguard. Once the screws are loosened,…

Removing and Replacing the Battery of the Harley Davidson Iron 883

In this video, follow the instructions to remove and replace the battery of the Harley Davidson Iron 883. First, place your motorcycle on the stand and remove the rider's seat. Next, disconnect the electrical connector located on the side and undo the fixing screw of the battery bracket using a socket spanner with an extension, as shown in the video. At this point, disconnect the battery wiring to remove it and replace it with the new one, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos