Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on the Honda ADV 150

Model: Honda Adv 150
Part: Air filter

Video tutorial

To replace the air filter on the Honda ADV 150, loosen the screws securing the cover of the casing near the rear wheel, above the transmission casing. Once the casing cover is removed, you can pull out the underlying air filter from its housing to replace it with a new spare part.

After inserting the new filter, close the casing by securing the cover with the appropriate screws, and check that everything is functioning perfectly.


Updated on 8 June 2026 by ScegliAuto


Related tutorials

How to Replace the Exhaust on the Honda ADV 150
Adv 150 To replace the exhaust on the Honda ADV 150, you need to loosen the screws that secure the exhaust tip to its housing. Once the screws are loosened, …
How to Replace the Transmission of the Honda ADV 150?
How to Replace the Transmission of the Honda ADV 150?
Adv 150 To replace the transmission of the Honda ADV 150, unscrew the screws securing the cover near the rear wheel on the left side of the bike. Once the co…
How to Replace the Battery in a Honda ADV 150 Scooter?
How to Replace the Battery in a Honda ADV 150 Scooter?
Adv 150 In this tutorial, you will see how to replace the battery in a Honda ADV 150 scooter, an extremely simple and quick operation. First, ensure that the…

How to Change the Engine Oil of a Triumph Speed 400?

To change the engine oil of a Triumph Speed 400, start by positioning the bike on a flat surface and ensure the engine is warm but not too hot. Locate the oil filler cap on the engine and unscrew it. Place a collection container under the oil drain plug on the oil sump and unscrew the plug to allow the used oil to drain out. Once the draining is complete, refit the drain plug. Remove and replace the oil filter using an oil filter wrench. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the filler cap opening until it reaches the recommended level, and you will have completed the change.

Watch the video!


by ScegliAuto

More videos