Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the rear brake pads on the Honda CBR 600RR, you need to loosen the bolts that secure the caliper to the brake disc. Once the bolts are loosened, you can detach the brake caliper from the disc, allowing the pads inside to be extracted and replaced with a new spare part. After removing the old pads, insert the new ones, and the caliper can be repositioned onto the disc. This way, you can insert the locking pins and secure everything with the previously removed bolts.

Updated on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on a Honda CBR 600RR?
How to Replace the Front Brake Pads on a Honda CBR 600RR?
Cbr 600 Rr To replace the front brake pads on a Honda CBR 600RR, loosen the screws securing the brake caliper to its disc: once these screws are unscrewed, proc…
How to Replace the Rear Brake Pads on a Honda CBR 600 RR
How to Replace the Rear Brake Pads on a Honda CBR 600 RR
Cbr 600 Rr To replace the rear brake pads on a Honda CBR 600 RR, loosen the screws that secure the pads inside their housing: these screws will be located at th…
How to replace the brake and clutch levers of the Honda CBR 600RR
How to replace the brake and clutch levers of the Honda CBR 600RR
Cbr 600 Rr Today's instructions will show us the process of disassembling and replacing the brake and clutch levers of the Honda CBR 600RR motorcycle. First, we…

How to Replace the Front Headlight on the Husqvarna 701?

In this tutorial, you will see how to replace the front headlight on the Husqvarna 701, a very simple and quick operation. First, ensure that the key is not inserted, then position yourself in front of the motorcycle, locate the four bolts on either side of the headlamp, and unscrew them using a Torx T30 key. Next, pull the entire assembly towards you, separate it from the support, and disconnect the power connector. At this point, you can separate the headlight from the panel, position the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos