Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda X Adv
Part: Key

In this short and simple guide, understand the main steps to disassemble and replace the battery in the key remote of the Honda X-Adv. First, take your remote control and start prying open the sides with something thin to split it into two parts; then access the electronic board and the battery, as shown in the video. At this point, replace the battery with a new one of the correct type; insert it the right way round and reassemble your remote, ensuring the two halves are securely fixed, following the video until the end!

Updated on 20 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the battery of the key remote control of the Honda X Adv.
Replacement of the battery of the key remote control of the Honda X Adv.
X Adv The following step-by-step instructions will show us how to disassemble and replace the battery of the key remote for the Honda X Adv motorcycle. Fir…
Replacing the Battery on Honda X Adv 750
Replacing the Battery on Honda X Adv 750
X Adv To remove the battery on the Honda X Adv 750, first access the under-seat compartment, clear it of any items, and remove the lower cover. Now, using …
Where is the Battery Located in the Honda X-ADV 750?
Where is the Battery Located in the Honda X-ADV 750?
X Adv This guide shows the location of the battery in the Honda X-ADV 750. To access the battery compartment, open the storage area under the seat and remo…

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos