Do it yourself
Frequently asked questions about cars and motorcycles

Model: Honda Cb 500
Part: Clutch

In this guide, you will learn the steps to disassemble and replace the clutch discs on a Honda CB 500 motorcycle. First, place your motorcycle on the centre stand and start unscrewing the screws on the clutch cover to remove it. Then, use a 10 mm socket wrench with an extension to unscrew the four screws of the clutch pack, as shown in the video. At this point, remove the clutch discs from the basket and replace them with new ones; alternate the cork discs with the metal ones, then reassemble the clutch pack.

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Cb 500 You can replace the clutch on the Honda CB 500 by loosening the screws that secure the circular cover panel located at the bottom of the right side. …
Cb 500 In this tutorial video, you will learn how to remove and replace the bulbs in the instrument cluster of a Honda CB 500. First, unscrew the fixing scr…
Cb 500 In this short video, you will see how to bleed and replace the brake fluid on a Honda CB 500 motorcycle in simple and quick steps. First, remove the …

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos