Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This video tutorial shows how to reset the oil light on a Honda SH 300 scooter. First, turn on the ignition by inserting the key into the slot and turning it to the first position, without starting the scooter. You will notice that the oil light is orange and remains steadily lit. At this point, use the two buttons located at the ends of the instrument panel; press and hold the trip button on the left and the clock button on the right simultaneously for about two to three seconds. The operation will then be completed, and the light will turn off.

Updated on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Honda SH
How to reset the service light on the Honda SH
Honda Sh Today we will explain the steps to reset the service light, related to the maintenance or oil light, on a Honda SH scooter model produced between 202…
Replacement of the battery of the Honda SH remote control
Replacement of the battery of the Honda SH remote control
Honda Sh To proceed with the replacement of the depleted battery of the Honda SH remote control, insert a lever, preferably made of plastic to avoid scratchin…
How to adjust the clock on the Honda SH
How to adjust the clock on the Honda SH
Honda Sh Adjusting the clock on the display of the Honda SH 125, 250, and 350 models is a very simple and quick operation to perform independently. To adjust …

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos