Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the air filter of the Honda Vision 110, loosen the screws that secure the cover protecting the casing located on the left side of the bike, just above the transmission casing. Once the screws securing this cover are loosened, you will be able to locate the air filter underneath, which can be extracted from its housing. After removal, insert the new one, then cover everything with the appropriate casing and secure the cover with the screws previously removed.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the air filter of the Honda Vision 110?
How do you replace the air filter of the Honda Vision 110?
Vision 110 The procedure for replacing the air filter on the Honda Vision 110 involves loosening the screws that secure the cover located on the left side of th…
How to Replace the Air Filter on the Honda Vision 110?
How to Replace the Air Filter on the Honda Vision 110?
Vision 110 To replace the air filter on the Honda Vision 110, loosen the screws securing the cover that protects the casing located on the left side of the bike…
How to Replace the Transmission on a Honda Vision 110
How to Replace the Transmission on a Honda Vision 110
Vision 110 To replace the transmission on a Honda Vision 110, loosen the screws securing the cover located at the rear left of the bike, just below the air filt…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos