Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
On the Honda Vision 110, the oil change is performed by undoing the bolt located at the bottom of the bike, which closes the oil drain plug; once opened, you can collect all the used oil in a suitably positioned container. When all the oil has drained out, top up by inserting new oil into the designated breather. This is located just above the exhaust, on the right side of the bike: once the necessary oil has been added, you can refit the plug to close everything.

Updated on 30 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a Honda Vision 110
How to Change the Engine Oil on a Honda Vision 110
Vision 110 To replace the engine oil on the Honda Vision 110, unscrew the bolt located at the bottom of the bike, which closes the oil drain plug; once opened, …
How to Change the Engine Oil of the Honda Vision 110?
How to Change the Engine Oil of the Honda Vision 110?
Vision 110 On the Honda Vision 110, to change the engine oil, loosen the bolt located at the bottom of the bike that seals the oil drain plug. Once opened, coll…
How to Change the Engine Oil on a Honda Dio - Vision 110
How to Change the Engine Oil on a Honda Dio - Vision 110
Vision 110 Today's guide will show you the procedure to change the engine oil while performing the routine maintenance service on the Honda Dio and Vision 110 s…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos