Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Sh 150
Part: Engine oil

Changing the engine oil on the Honda SH 150 scooter, as shown in this tutorial, is an extremely simple and quick operation. First, wait for the engine to cool down sufficiently to operate safely, then position a container underneath, open the filler cap, and using a 12mm socket, unscrew the drain bolt. Allow all the old oil to drain out, then open the filter housing with a 17mm spanner and proceed with its replacement. At this point, simply reassemble everything and pour in the new oil through the designated hole.

Updated on 11 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Transmission Oil on the Honda SH 150 Scooter
How to Change the Transmission Oil on the Honda SH 150 Scooter
Sh 150 In this tutorial, we will see how to change the transmission oil on the Honda SH 150 scooter, a very simple and quick operation. First, wait until th…
How to Reset the Service Light on the Honda SH 150 Scooter?
How to Reset the Service Light on the Honda SH 150 Scooter?
Sh 150 Resetting the service light on the Honda SH 150 scooter, as shown in this tutorial, is a very simple and quick operation. Before proceeding, ensure t…
How to reset the service on the Honda SH 150 scooter?
How to reset the service on the Honda SH 150 scooter?
Sh 150 Resetting the service on the Honda SH 150 scooter, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos