Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on a Honda Click 125

Model: Honda Click 125
Part: Service warning light

Video tutorial

In this mini guide for your Honda Click 125, we will discover how to manually reset the oil light. First, place your Honda Click 125 on its stand and insert the key to start the central display.

Once done, press and hold both buttons located below the display until it starts to flash. At this point, press the right button multiple times until the "Oil change" message begins to flash.

Finally, hold the same button until the reset is complete.


Updated on 17 September 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Service on the Honda Click 125 Scooter
How to Reset the Oil Service on the Honda Click 125 Scooter
Click 125 Resetting the oil service on the Honda Click 125 scooter, as shown in this tutorial, is an extremely simple and quick operation. Before doing this, e…
How to Replace the Air Filter of a Honda Click 125
How to Replace the Air Filter of a Honda Click 125
Click 125 Start by placing your Honda Click 125 on its centre stand. Next, unscrew and remove the screws securing the air filter cover, then dislodge and remov…
How to change the engine oil in the Honda Click 125 scooter?
How to change the engine oil in the Honda Click 125 scooter?
Click 125 In this tutorial, you will see how to change the engine oil in the Honda Click 125 scooter, a very simple and quick operation. First, ensure that the…

How to Set the Time on a Kymco DTX360?

To set the time on a Kymco DTX360, follow these steps. First, turn on the scooter and ensure it is in time display mode on the dashboard. Once you find this mode, press and hold the button for setting the time, located on the scooter's handlebars. After a few seconds, the display will start to flash, indicating that you can now adjust the time. Use the adjustment buttons to increase or decrease the hour until you reach the desired time. When you have set the correct time, press the time setting button again to confirm your selection. The display will stop flashing and the time will be set correctly. Be sure to consult the owner's manual for specific instructions for your Kymco DTX360 model, as the procedure may vary slightly.

Watch the video!


by ScegliAuto

More videos