Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Forza
Part: Engine oil

Changing the engine oil on the Honda Forza 125 scooter is a very simple task. First, place your scooter on a flat surface and on a stand, then use a 17 mm spanner to remove the nut securing the oil sump. Once the nut is removed, position a bowl or an old container underneath and let all the old oil drain out. While the oil continues to flow, use a 12 mm spanner to remove the nut securing the oil filter. After replacing it, you can refit both the filter nut and the sump nut. Finally, pour oil into the reservoir. Reset the warning light by turning on the ignition and pressing the reset button located on the dashboard for a few seconds.

Updated on 20 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil of the Honda Forza 125?
How to Change the Engine Oil of the Honda Forza 125?
Forza To change the engine oil of the Honda Forza 125, access the lower part of the bike where the oil drain plug is located in the central area. By unscre…
How to Reset the Service on the Honda Forza 125 Scooter?
How to Reset the Service on the Honda Forza 125 Scooter?
Forza In this tutorial, see how to reset the service on the Honda Forza 125 scooter, an extremely simple and quick operation. Before proceeding, ensure you…
How to Change Engine Oil in the Honda Forza Scooter?
How to Change Engine Oil in the Honda Forza Scooter?
Forza In this tutorial, we will see how to change the engine oil in the Honda Forza scooter, a very simple and quick operation. First, ensure that the engi…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos