Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time on the Honda PCX 160 Scooter

Model: Honda Pcx 160
Part: Clock

Video tutorial

In this tutorial, see how to set the time on the Honda PCX 160 scooter, a very simple and quick operation, for example, after disconnecting the battery or when switching to daylight saving time. First, insert the key, then turn on the instrument cluster and press both buttons on the dashboard until the clock starts to flash.

At this point, adjust the hour using the left button, switch to minutes with the right button, and adjust them in the same way. Finally, use the right button to save the setting.


Updated on 29 September 2026 by ScegliAuto


Related tutorials

How to adjust the time on the Honda PCX 160 scooter?
How to adjust the time on the Honda PCX 160 scooter?
Pcx 160 In this tutorial we can see how to adjust the time on the Honda PCX 160 scooter, an extremely simple and quick operation, to be carried out for examp…
How to adjust the time on the Honda PCX 160 scooter?
How to adjust the time on the Honda PCX 160 scooter?
Pcx 160 In this tutorial, we can see how to adjust the time on the Honda PCX 160 scooter, an extremely simple and quick operation to be carried out, for exam…
How to set the time on the Honda PCX 160
How to set the time on the Honda PCX 160
Pcx 160 These short and simple steps will show us how to adjust the time on the display of the Honda PCX 160 instrument panel. First, we put the scooter on t…

How to Replace the Headlight Bulb on the Suzuki Address 110

To replace the headlight bulb on the Suzuki Address 110, you must completely remove the wing mirrors so that you can rotate them counterclockwise: once removed, proceed to loosen the screws securing the front fairing, located at the sides of the instrument cluster. Once the front fairing is removed, disconnect the internal connector of the headlight, allowing the bulb inside to be extracted and replaced with a new one; after replacement, reassemble all the removed parts.

Watch the video!


by ScegliAuto

More videos