Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the front brake pads of the Honda Vision 110, you need to loosen the screws that fix the brake caliper to the corresponding disc: once the caliper fixing screws have been loosened, you can proceed by removing the pins that secure the calipers to their seat so that you can remove the pads and insert the new ones. After their replacement, you can reposition the caliper on the corresponding disc: you will then need to fix it with the appropriate screws in order to ensure that everything works correctly.

Posted on 15 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front brake pads on the Honda Vision 110?
How to replace the front brake pads on the Honda Vision 110?
Vision 110 To replace the front brake pads on the Honda Vision, loosen the screws that secure the brake caliper to the corresponding disc, allowing the caliper …
How do you replace the rear brake pads of the Honda Vision 110?
How do you replace the rear brake pads of the Honda Vision 110?
Vision 110 The rear brake pads installed on the Honda Vision 110 can be replaced by loosening the screws that fix the brake caliper to the appropriate brake dis…
How to Replace the Front Headlight and Bulb on a Honda Vision 110
Vision 110 In this video tutorial, you will learn how to remove and replace the front headlight and its bulb on a Honda Vision 110 scooter. First, place your sc…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos