Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Cbr 600 Rr
Part:

In order to replace the levers of the Honda CBR 600 RR, you need to loosen the screws that secure them to their housings, which are located on the sides of the handlebars. Once the screws are loosened, you can proceed to completely detach the lever and then loosen the nut that connects the lever to the corresponding cable. Once both levers are freed from the cables, you can proceed to connect the new ones and then secure them to their housings; by doing so, you can verify that everything works correctly.

Posted on 16 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the levers of the Honda CBR 600 RR?
How do you replace the levers of the Honda CBR 600 RR?
Cbr 600 Rr To replace the levers of the Honda CBR 600 RR, you need to loosen the screws that fix the calipers to their housings on the sides of the handlebars: …
How to Replace the Rear Brake Pads on a Honda CBR 600 RR
How to Replace the Rear Brake Pads on a Honda CBR 600 RR
Cbr 600 Rr To replace the rear brake pads on a Honda CBR 600 RR, loosen the screws that secure the pads inside their housing: these screws will be located at th…
How to replace the brake and clutch levers of the Honda CBR 600RR
How to replace the brake and clutch levers of the Honda CBR 600RR
Cbr 600 Rr Today's instructions will show us the process of disassembling and replacing the brake and clutch levers of the Honda CBR 600RR motorcycle. First, we…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos