Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in the Honda Forza 250 Scooter

Model: Honda Forza 250
Part: Engine oil

Video tutorial

In this tutorial, you will see how to change the engine oil in the Honda Forza 250 scooter, a very simple and quick operation to perform every 12 months. First, ensure that the engine is sufficiently cool, then place a container underneath the scooter.

Open the fill hole, locate the drain plug, and unscrew it with a 17mm spanner. Next, clean the filter of any dirt residue, allow all the oil in the system to drain out, and then add the required amount of oil through the designated upper hole.


Updated on 7 October 2026 by ScegliAuto


Related tutorials

How to change the engine oil in the Honda Forza 250 scooter?
How to change the engine oil in the Honda Forza 250 scooter?
Forza 250 .. In this tutorial, learn how to change the engine oil in the Honda Forza 250 scooter, a very simple and quick operation. First,.. …
How to Change the Engine Oil on the Honda Forza 250 Scooter
How to Change the Engine Oil on the Honda Forza 250 Scooter
Forza 250 In this tutorial, you will learn how to change the engine oil on the Honda Forza 250 scooter, a very simple and quick operation. First, ensure that t…
How to Replace the Battery on the Honda Forza 250
How to Replace the Battery on the Honda Forza 250
Forza 250 Today's guide provides instructions on how to remove and replace the battery of the Honda Forza 250 scooter. First, place the scooter on the centre s…

How to change the engine oil of a Yamaha MT-07?

To change the engine oil of a Yamaha MT-07, follow these steps. Start by placing the bike on a flat surface and ensure the engine is warm but not too hot. Remove the oil cap from the top of the engine and unscrew the oil drain plug on the engine casing, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew the plug to completely drain the used oil. Once drained, refit the drain plug. Remove and replace the oil filter using an oil filter spanner. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the oil opening until reaching the recommended level. Check the oil level using the dipstick and add oil if necessary. Refit the oil cap and ensure it is securely tightened. Start the engine and let it run for a few minutes to distribute the oil, and you will have completed the procedure.

Watch the video!


by ScegliAuto

More videos