Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of a Honda SH150i?

Model: Honda Sh 150
Part: Engine oil

Video tutorial

To change the engine oil of a Honda SH150i, start by warming up the engine for a few minutes to thin the oil. Turn off the engine and place the scooter on a stable, level surface. Locate the oil drain plug under the engine.

Position a collection container under the plug and use a spanner to unscrew it, allowing the old oil to drain completely. Once all the oil has drained, securely re-tighten the drain plug.

Find the oil filler cap, usually located on one side of the engine, and remove it. Using a funnel, slowly pour in the recommended amount of new oil as specified in the owner's manual. After adding the oil, securely re-tighten the filler cap. Start the engine and let it run for a few minutes, then turn it off and check for any oil leaks.

This will ensure that the new oil is properly distributed throughout the engine and that everything is in order.


Updated on 9 October 2026 by ScegliAuto


Related tutorials

How to replace the remote battery of the Honda SH150i scooter?
How to replace the remote battery of the Honda SH150i scooter?
Sh 150 In this tutorial, you will see how to replace the remote battery of the Honda SH150i scooter. For this simple and quick operation, you will need a re…
How to Replace Engine Oil and Oil Filter on a Honda SH
How to Replace Engine Oil and Oil Filter on a Honda SH
Sh 150 Today, with the help of this video, you will learn how to change the engine oil on your Honda SH. This is a fairly simple operation, so let's see how…
How to Change Engine Oil and Oil Filter on a Honda SH
How to Change Engine Oil and Oil Filter on a Honda SH
Sh 150 Today, you will learn how to change the engine oil on your Honda SH 150. It is not a very complex operation if you put in some effort. To drain the e…

How to Remove the Rear Wheel of the GasGas EC 250?

To remove the rear wheel of the GasGas EC 250, first dismantle the chain by removing it from the sprocket attached to the rear wheel. Once the chain is removed, you can unscrew the nut that secures the rear wheel spindle and holds it to the swingarm. When the securing spindle is removed, you can completely take out the wheel from its housing and replace it with a new spare part. After replacement, refit the securing spindle and reposition the chain around the sprocket.

Watch the video!


by ScegliAuto

More videos