Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Battery from a Honda PCX 150

Model: Honda Pcx 150
Part: Battery

Video tutorial

Removing and replacing the battery of the Honda PCX 150 is a straightforward task that you can do yourself, saving on workshop costs. First, lift the seat of the motorcycle to access the battery cover.

Use a crosshead screwdriver to remove the two screws that secure the battery cover. Next, disconnect the two terminals, first the positive and then the negative, and remove the battery from its compartment.

The battery to be installed is a YTXL-BS. To install it, connect the two terminals and push it into the battery compartment. Close the cover and seat, then test the battery's operation.


Updated on 11 October 2026 by ScegliAuto


Related tutorials

How to replace the battery of the Honda PCX 150
How to replace the battery of the Honda PCX 150
Pcx 150 The battery of the Honda PCX 150 is located inside the seat, specifically behind a side cover. To replace the battery, we must: - open the seat; - re…
How to Remove the Rear Wheel of the Honda PCX 150
How to Remove the Rear Wheel of the Honda PCX 150
Pcx 150 Today's step-by-step instructions will show you how to remove and replace the rear wheel and tyre of the Honda PCX 150. First, place the scooter on t…
How to reset the service on the Honda PCX 150 scooter?
How to reset the service on the Honda PCX 150 scooter?
Pcx 150 In this tutorial we can see how to reset the service on the Honda PCX 150 scooter, an extremely simple and quick operation, to be carried out only on…

How to Replace the Fork on a Peugeot Kisbee?

To replace the fork on a Peugeot Kisbee, loosen the bolts securing the front wheel to its housing: you will need to unscrew the bolts that hold the corresponding nut to remove the central axle of the wheel. Next, disconnect the brake caliper from the disc and proceed by unscrewing the bolts of the fairings that surround the fork: at this point, you can loosen the bolts that secure the fork to the steering, allowing you to insert the new one. This can then be secured to the steering, covered with the fairing, and the front wheel installed.

Watch the video!


by ScegliAuto

More videos