Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the headlight bulb of the Honda Civic

Model: Honda Civic MK 9 - Years: 2012, 2013, 2014, 2015
Part: Headlight bulb

See other generations:
Video tutorial

Today we will explain how to replace the front headlight bulbs on a Honda Civic vehicle produced from 2012 to 2015. To replace the bulb on the right front headlight, we need to remove the windshield washer fluid tank. To remove the tank, we need to use a flat and thick screwdriver to lift the plastic locking clip and rotate the tank to remove it. After removing the tank, disconnect the connector from the bulb, rotate the bulb counterclockwise to remove it; insert the new bulb and after connecting the connector, mount the fluid tank.

To replace the bulb on the left front headlight, we need to remove the two plastic screws on the air tube cover using needle-nose pliers. After removing the cover, disconnect the bulb connector and remove it. Insert the new bulb and after connecting the connector, mount the tube cover.

It is important that throughout the replacement process, the vehicle lights are turned off.


Posted on 21 February 2025 by ScegliAuto


Related tutorials

Honda Civic (2016-2021 / MK 10) If you want to completely replace the front headlight bulb of your Honda Civic by yourself, then the following guide is all you need. First of all, g…
Honda Civic (2016-2021 / MK 10) Replacing the front headlight bulb on your 2017 Honda Civic takes just a few minutes. By following the steps in this guide, you will have no difficul…
Honda Civic (2006-2012 / MK 8) To replace the front headlight bulb on a Honda Civic, open the bonnet to access the components inside the engine bay. Here, detach the protective cov…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos