Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Honda Civic?

Model: Honda Civic MK 10 - Years 2016-2021
Part:

In this tutorial, you will see how to reset the tyre pressure light on a Honda Civic, a very simple and quick operation to perform only after restoring the correct pressure in each tyre according to the instructions in the manual. First, enter the cabin, then insert the key and turn on the instrument panel. Next, access the general menu on the touchscreen display, go to "Settings", "Vehicle", "TPMS Calibration", and perform the reset by selecting the "Calibrate" option. To complete the procedure, simply restart the ignition.

Posted on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on the Honda Civic
How to Reset the Tyre Pressure Warning Light on the Honda Civic
Honda Civic (2016-2021 / MK 10) Below are the instructions that will allow you to reset the tyre pressure warning light on the Honda Civic; before performing the TPMS reset, ensure …
How to Reset the Tyre Pressure on a Honda Civic
How to Reset the Tyre Pressure on a Honda Civic
Honda Civic (2016-2021 / MK 10) In today's video, we will see how to reset the tyre pressure on a Honda Civic, a tenth-generation model produced from 2016 to 2021. Let's start the p…
How to Reset the Tyre Pressure Light on a Honda Civic?
How to Reset the Tyre Pressure Light on a Honda Civic?
Honda Civic (2016-2021 / MK 10) .. In this tutorial, see how to reset the tyre pressure light on a Honda Civic, a very simple and quick operation to perform only.. …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos