|
Do it yourself
| |||
| ||||
Replacement of Internal Door Handle
Model: Honda Civic
MK 7
- Years:
2001, 2002, 2003, 2004, 2005, 2006
Video tutorial
If you want to replace one of the internal door handles of the front door of your Honda Civic (models from 2001 to 2005), this tutorial will guide you through the correct procedure. Using a small flathead screwdriver, lift the cover located inside the small compartment of the handle and unscrew the two screws inside: remove the handle block and, with the help of a screwdriver, detach it from the door; also disconnect the small electrical connector. Using a screwdriver, unscrew the screws from the block just removed to possibly remove the "lock" button. Once you have a new handle, reattach it as before to the vehicle and place it back in its compartment, screw in the two securing screws, and replace the small cover.
Updated on 4 February 2026 by ScegliAuto
Related tutorials
Honda Civic
(1992-1995 /
MK 5)
Obtain the replacement handle and ensure it functions correctly. Open the door and remove the corresponding internal panel by prying it from the open…
Honda Civic
(1995-2001 /
MK 6)
In this tutorial, see how to replace the rear outer handle on a Honda Civic, a very simple and quick operation. For this, you will need a set of scre…
Honda Civic
(2016-2021 /
MK 10)
The great thing about the Honda Civic is that to remove the door panel, there is only one fixing screw to remove, whereas usually there are many arou…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in |
Resetting the Service Light on the Mitsubishi Canter
When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.023
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |