Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear outer handle on a Honda Civic?

Model: Honda Civic MK 6 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Handle

See other generations:
Video tutorial

In this tutorial, see how to replace the rear outer handle on a Honda Civic, a very simple and quick operation. For this, you will need a set of screwdrivers and both a 10mm spanner and socket.

First, remove the cover of the large support handle, then unscrew all the indicated screws, disconnect the internal handle cable, and remove the door panel. Next, remove the screws from the lock, detach the cable from the supports, and unscrew the two indicated bolts.

At this point, you can extract the outer handle, detach it, and fit the replacement by following the reverse procedure.


Updated on 5 June 2026 by ScegliAuto


Related tutorials

How to Replace the Outer Door Handle on the Honda Civic
How to Replace the Outer Door Handle on the Honda Civic
Honda Civic (2006-2012 / MK 8) Today, discover the steps to remove and replace the outer door handle on the Honda Civic. First, open the front door and start by removing the front …
Removing the External Door Handle on a Honda Civic
Removing the External Door Handle on a Honda Civic
Honda Civic (2006-2012 / MK 8) In this video, learn how to remove and replace the external door handle on the front door of a Honda Civic by following these simple steps. First, op…
How to Replace the Front Door Handle on a Honda Civic
How to Replace the Front Door Handle on a Honda Civic
Honda Civic (2016-2021 / MK 10) Today, we will go through the steps to remove and replace the external door handle on the front door of a Honda Civic. First, get inside the vehicle …

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos