|
Do it yourself
| |||
| ||||
Replacing Indicator Bulb on Honda Civic Wing Mirror
Model: Honda Civic
MK 8
- Years:
2006, 2007, 2008, 2009, 2010, 2011, 2012
Video tutorial
Use a plastic wedge (or a small flat-head screwdriver if necessary, but the wedge is preferable) and lever in the lower gap of the cover, as shown in the video. Perform this operation carefully to release the mirror cover from the supporting structure. Once done, disconnect the indicator connector and unscrew the Torx screws that secure the light to the cover. At this point, replacing the indicator bulb will be straightforward. Proceed in reverse for complete reassembly: screw the light back onto the cover and insert it back into place by hand.
Updated on 4 April 2026 by ScegliAuto
Related tutorials
Honda Civic
(2016-2021 /
MK 10)
Today, in this tutorial video, you will learn how to remove and replace the external wing mirror on the Honda Civic. First, open the front door and s…
Honda Civic
(2006-2012 /
MK 8)
In this tutorial, you will see how to remove the cover of the external wing mirror on a Honda Civic, a very simple and quick operation. First, diseng…
Honda Civic
(2006-2012 /
MK 8)
This video shows how to repair the external rear-view mirror of the Honda Civic 8. This tutorial is useful if the mirror's closure starts to malfunct…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in |
Resetting the Service Light on the Mitsubishi Canter
When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.010
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |