Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Driver's Window Regulator Motor on Honda CR-V

Model: Honda CR-V MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Power window motor

See other generations:
Video tutorial

Using a plastic wedge, remove the upper casing by prying it in the gap and then disconnect the connector. With a small flathead screwdriver, remove the screw cover behind the opening handle and unscrew the exposed screws with a crosshead screwdriver.

Do the same in the compartment behind the window switch buttons. Always using the plastic wedge, remove the entire panel of the aforementioned buttons and disconnect their connectors.

At this point, you can forcefully extract the door panel and disconnect the cables, giving you access to the window regulator motor which you can remove by following the video procedure.


Updated on 17 April 2026 by ScegliAuto


Related tutorials

Honda CR-V (2007-2012 / MK 3) To replace the wing mirror of the Honda CR-V, first remove the door panel by unscrewing the screws located near the internal handle and close to the …
Honda CR-V (2012-2017 / MK 4) To remove the door panel on a Honda CR-V, start by detaching the small plastic covers located near the internal rear-view mirror, at the internal han…
Honda CR-V (2007-2012 / MK 3) Is your windscreen wiper not working anymore? Follow this guide to remove the front wiper motor from a Honda. Pull the plastic lever located at the b…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos