|
Do it yourself
| |||
| ||||
Replace Engine Spark Plugs
Model: Honda Civic
MK 7
- Years:
2001, 2002, 2003, 2004, 2005, 2006
Video tutorial
Remove the plastic cover protecting the engine by undoing the four securing screws. Using a 10 mm socket spanner, undo the retaining nut of the first spark plug and pull the connector upwards. The first spark plug is located at the bottom of the well. Before proceeding with the removal, clean the wells thoroughly with compressed air to eliminate any dirt that could fall into the combustion chamber. Using the appropriate spark plug tool, which has a rubber gripping device, carefully insert it onto the spark plug head and undo it. Be careful not to drop any foreign objects into the well. Replace the spark plug with one of the same model, inserting it carefully into the well, always using the appropriate tool, and turn it gently, ensuring it screws in correctly. If you feel resistance, remove it and try again. Spark plugs should be tightened with a torque wrench; if you do not have one, tighten without overdoing it. Repeat the same procedure for the other spark plugs.
Updated on 8 February 2026 by ScegliAuto
Related tutorials
Honda Civic
(2006-2012 /
MK 8)
Replacing the spark plugs? Let's see how to remove the plugs on the Civic. Pull the lever to open the engine compartment located at the bottom left o…
Honda Civic
(2006-2012 /
MK 8)
In this video tutorial, you can see how to replace the spark plugs in a Honda Civic 8: get in the vehicle, turn off the engine, and pull the handbrak…
Honda Civic
(2006-2012 /
MK 8)
To replace the spark plugs of the Honda Civic, open the bonnet to access the components at the top of the engine block. Here, you will find the screw…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Resetting the Service Light on the Mitsubishi Canter
When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.028
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |