Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Civic
    4. : How do you replace the spark plugs on the Honda Civic?

Honda Civic - Video tutorial

Model: Honda Civic MK 8 - Years 2006-2012
Part: Spark plugs
Operation: How do you replace the spark plugs on the Honda Civic?

In order to replace the spark plugs on the Honda Civic, you have to open the hood, so that you can unscrew the bolts that secure the plastic cover of the upper part of the engine block. Once this cover has been removed, it will be possible to disconnect the connectors connected to the injectors and remove the latter from their housing: the spark plugs can be found under the injectors, which must be removed using a socket wrench. In this way it will be possible to insert the new spark plugs, connecting and installing the injectors and covering everything with the plastic panel.


Posted on 9 August 2022 by ScegliAuto



How do you replace the spark plugs on the Honda Civic?
Honda Civic (2006-2012 / MK 8) In order to replace the spark plugs on the Honda Civic you will need to open the hood, in order to access the components in the upper part of the eng
How to change the spark plugs in the Honda Civic?
Honda Civic (2001-2006 / MK 7) The Honda Civic's spark plugs are 4. We can replace them all at the same time or just change the one in failure, the procedure remains the same. Afte
Replace the spark plugs on Honda Civic
Honda Civic (2006-2012 / MK 8) Replace the spark plugs? Let's see the disassembly of the spark plugs on the Civic. We pull the lever to open the engine compartment located at the b

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos