Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Interior Light Bulbs on Honda Civic

Model: Honda Civic MK 8 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Interior dome light bulb

See other generations:
Video tutorial

Use a small flat-head screwdriver to pry into the slots of the interior light as clearly shown in the video. These slots are designed to allow easy access for your removal tool.

This way, you will easily remove the cover (interior light), but keep one hand underneath to catch it if it falls. Now, with the switch in the "off" position (light off), use a small fine tool to pry under the bulb to extract it. Reverse the process to install the new bulb and reinsert the interior light.


Updated on 24 May 2026 by ScegliAuto


Related tutorials

Honda Civic (2006-2012 / MK 8) See how to remove the interior light and replace the damaged bulb of a Honda Civic. Pry between the light and the cover lens (without breaking the le…
Honda Civic (2012-2015 / MK 9) In this tutorial, see how to replace the headlining in a Honda Civic, a very simple operation. First, go inside the cabin, then remove both sun visor…
Honda Civic (2006-2012 / MK 8) Here’s how to replace the front headlight bulbs on a Honda Civic: open the bonnet by pulling the lever located at the bottom right of the dashboard a…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos