Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Headlining in a Honda Civic?

Model: Honda Civic MK 9 - Years: 2012, 2013, 2014, 2015
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, see how to replace the headlining in a Honda Civic, a very simple operation. First, go inside the cabin, then remove both sun visors by unlocking the respective side clips.

Next, unclip the ceiling light, remove it by unscrewing the indicated screws, and continue by removing all the handles above the doors. At this point, simply unclip all the pillar covers, remove the rear ceiling light, and separate the headlining from the roof.

To fit the replacement, just follow the reverse procedure.


Updated on 20 September 2026 by ScegliAuto


Related tutorials

Honda Civic (1995-2001 / MK 6) .. In this tutorial, we will see how to replace the headlining in a Honda Civic, a very simple and quick operation. First, go inside the.. …
Honda Civic (2006-2012 / MK 8) In this tutorial, you will see how to remove the headlining in a Honda Civic, a very simple and quick operation. First, go inside the cabin, then rem…
Honda Civic (2012-2015 / MK 9) Open the sun visor as if you are using it and with a small flat screwdriver, rotate the hook that secures the visor to the roof of the car (see video…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos