Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery on the Honda Passport?

Model: Honda Passport Ck58, Cm58, Dm58 - Years: 1997, 1998, 1999, 2000, 2001, 2002
Part: Key

See other generations:
Video tutorial

In this tutorial, you will see how to replace the remote battery on the Honda Passport, a very simple and inexpensive task. First, you will need a small Phillips screwdriver and two replacement CR2016 batteries.

Start by unscrewing the screw on the back, then separate the two halves of the remote by prying them apart, if necessary, with a flat tool. Once done, remove both batteries and insert the replacements, positioning them with the positive side facing you. Finally, reassemble the two halves of the remote.


Updated on 27 May 2026 by ScegliAuto


Related tutorials

How to replace the battery of the Honda Passport remote control?
How to replace the battery of the Honda Passport remote control?
Honda Passport (2019-2026 / YF7, YF8) In this tutorial, we can see how to replace the battery of the Honda Passport remote control, an extremely simple and quick operation. To do this, we…
How to Replace the Key Battery in the 2021 Honda Passport
How to Replace the Key Battery in the 2021 Honda Passport
Honda Passport (2019-2026 / YF7, YF8) This guide is for all 2021 Honda Passport owners who want to replace the battery inside the smart key. First, remove the physical emergency key and u…
How to Replace the Key Battery of the Honda Passport
How to Replace the Key Battery of the Honda Passport
Honda Passport (1997-2002 / Ck58, Cm58, Dm58) To replace the old button cell inside your Honda Passport key, follow these simple and quick steps. Just follow the instructions below and put them i…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos