Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Ridgeline
    4. : How to replace the Honda Ridgeline fog light

Honda Ridgeline - Video tutorial

Model: Honda Ridgeline MK 2 - Years 2016-2023
Part: Fog lights
Operation: How to replace the Honda Ridgeline fog light

If we need to replace the front fog light on this model of car we will find the information and indications reported in this description and we can help with the images of the video. To begin, we open the bonnet and identify the stone guard panel from under the car which must be removed by removing the relative fixing screws. In this way we will have access to the rear part of the front bumper where the fog lights are fixed. Then proceed to disconnect the power supply terminal first and then remove the fixing screws of the small headlight. Then proceed to position the new fog light, re-tighten the screws and finally reconnect the power supply terminal.


Posted on 1 June 2024 by ScegliAuto



How to change the color of the Honda badge and Ridgeline name on a Honda Ridgeline
Honda Ridgeline (2016-2023 / MK 2) If we had one stereotype it was that Americans loved chrome trim. Instead we can say that this is not true, because the videos in which Americans wan
How to reset the 2019 Honda Ridgeline oil light
Honda Ridgeline (2016-2023 / MK 2) If you own a Honda Ridgeline second series (year 2019) and want to find out what are the various steps to perform if you want to manually reset the e
How to reset the oil light on the 2008 Honda Ridgeline
Honda Ridgeline (2005-2014 / MK 1) To manually reset the oil light on your 2008 Honda Ridgeline, simply follow the steps described in our new guide. First, turn on the instrument panel

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos