Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fog light bulb on the 2015 Honda CR-V

Model: Honda CR-V MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Fog lights

See other generations:
Video tutorial

Today, I will explain how to replace the fog light bulb on the 2015 Honda CR-V. To replace the bulb, you must remove the plastic cover on the bodywork and then detach the light from its housing using a flat-head screwdriver or a trim removal tool. It is very important to be gentle during the procedure to avoid scratching the bodywork.

Carefully remove the light from its housing and disconnect the connector, then open the cover to replace the bulb. After replacing the bulb, close the cover and insert the light back into its housing.

Refit the plastic cover and turn on the lights to test their operation.


Posted on 26 August 2026 by ScegliAuto


Related tutorials

How to Replace the Front Fog Light Bulbs on a Honda CR-V
How to Replace the Front Fog Light Bulbs on a Honda CR-V
Honda CR-V (2012-2017 / MK 4) This guide provides instructions on how to remove and replace the front fog light bulbs on a Honda CR-V, following these simple steps. First, remove …
How to Install Fog Lights on the Honda CR-V?
How to Install Fog Lights on the Honda CR-V?
Honda CR-V (2007-2012 / MK 3) Today, we will see in this short and simple guide how to install the front fog lights on the Honda CR-V, following the instructions below. First, ope…
Replacing the Front Fog Light on a CR-V
Replacing the Front Fog Light on a CR-V
Honda CR-V (2012-2017 / MK 4) Replacing the fog light on a CR-V? Here’s how to remove the fog light from the front bumper. Remove the fog light cover plastics using a trim removal…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos