Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Fog Light on a CR-V

Model: Honda CR-V MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Fog lights

See other generations:
Video tutorial

Replacing the fog light on a CR-V? Here’s how to remove the fog light from the front bumper. Remove the fog light cover plastics using a trim removal tool (remove the piece from above the bumper).

Once the plastic is removed, unscrew the fog light screws and extract it from the car's bumper (disconnect the power cable to remove it). Fit the new fog light and connect the electrical connector, then install the cover above the front bumper. Turn on and test the operation of the bulbs (use the levers and control knobs).


Updated on 27 March 2026 by ScegliAuto


Related tutorials

How to replace the fog light bulb on the 2015 Honda CR-V
How to replace the fog light bulb on the 2015 Honda CR-V
Honda CR-V (2012-2017 / MK 4) Today, I will explain how to replace the fog light bulb on the 2015 Honda CR-V. To replace the bulb, you must remove the plastic cover on the bodywor…
How to Install Fog Lights on the Honda CR-V?
How to Install Fog Lights on the Honda CR-V?
Honda CR-V (2007-2012 / MK 3) Today, we will see in this short and simple guide how to install the front fog lights on the Honda CR-V, following the instructions below. First, ope…
Removal of the Front Headlight and Replacement of Bulbs
Honda CR-V (2002-2007 / MK 2) To remove the front headlights, you must first remove the bumper: open the bonnet and remove the push clips (it is sufficient to pull out the central…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos