Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of the Front Headlight and Replacement of Bulbs

Model: Honda CR-V MK 2 - Years 2002-2007
Part: Headlight

To remove the front headlights, you must first remove the bumper: open the bonnet and remove the push clips (it is sufficient to pull out the central pin) that secure the plastic cover to the grille; unscrew the fastening bolts of the bumper to the wing and those along the lower edge, under the fog light housing. Then, detach the bumper and proceed to remove the headlights by unscrewing the relevant fastening bolts; pull the headlight forward and disconnect the bulb connectors. At this point, you can proceed with the possible replacement of the bulbs (it is recommended to replace them all due to the complexity of the disassembly).

Updated on 9 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Headlight Bulbs on a Honda CR-V
How to Replace the Headlight Bulbs on a Honda CR-V
Honda CR-V (2002-2007 / MK 2) Do you want to replace the headlight bulbs on a Honda CR-V? Let's see how to proceed: open the bonnet by pulling the lever located at the bottom righ…
How to replace the rear headlight bulb of the Honda CR V
How to replace the rear headlight bulb of the Honda CR V
Honda CR-V (2012-2017 / MK 4) Today we will explain how to replace the front headlight bulb on a Honda CR V vehicle. Performing the replacement is a simple and quick operation to …
Replacing the Front Fog Light on a CR-V
Replacing the Front Fog Light on a CR-V
Honda CR-V (2012-2017 / MK 4) Replacing the fog light on a CR-V? Here’s how to remove the fog light from the front bumper. Remove the fog light cover plastics using a trim removal…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos