Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Fog Lights on the Honda CR-V?

Model: Honda CR-V MK 3 - Years 2007-2012
Part: Fog lights

Today, we will see in this short and simple guide how to install the front fog lights on the Honda CR-V, following the instructions below. First, open the bonnet of your car and start by removing the front bumper; to do this, unscrew the fixing screws, detaching it first from the sides. Next, remove the fog light provision by making a cut, and install the new fog lights; then connect the fog lights electrically, reaching the car's original light switch, following the video tutorial to the end!

Updated on 7 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Installing Front Fog Lights
Installing Front Fog Lights
Honda CR-V (2007-2012 / MK 3) Remove the engine cover by taking out the seven clips. Remove the screws under the caps and the clips securing the bumper located in the wheel arches…
Where are the Fuses Located in a Honda CR-V?
Where are the Fuses Located in a Honda CR-V?
Honda CR-V (2007-2012 / MK 3) The fuses in the Honda CR-V are located inside the designated fuse boxes mounted on the vehicle: the first is behind the plastic panel located at the…
Installation of Front Fog Lights
Installation of Front Fog Lights
Honda CR-V (2007-2012 / MK 3) The installation is quite complex and requires at least two hours of work. Remove the engine cover by taking out the seven clips. Remove the screws u…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos