Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install front fog lights on the Honda City

Model: Honda City GM3, MK 5, GM2 - Years 2008-2021
Part: Fog lights

Shortly we will see the main instructions that will allow us to install the front fog lights of the Honda City. First, we open the hood of the car and start by removing the front bumper, unscrewing the fixing screws located at the top; we detach the bumper on the sides until we remove it, then proceed with the installation of the fog lights (making the electrical connection), as shown in the video. At this point, we check the operation of the fog lights, being able to then reassemble and fix the bumper on the body.

Posted on 9 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Honda City
How to Replace the Air Filter on a Honda City
Honda City (2002-2008 / GD8, GD6, GD9, GE1, GE4, GD7) In this video, you will see how to change the air filter on a Honda City. In the Honda City, the air filter box is located next to the battery. Use a…
How to set the clock on the Honda City
How to set the clock on the Honda City
Honda City (2008-2021 / GM3, MK 5, GM2) Adjusting the clock on a 2013 Honda City vehicle is a very simple and quick operation, which can be done independently thanks to our short video tuto…
How to Reset the Service Light on a Honda City?
How to Reset the Service Light on a Honda City?
Honda City (2014-2023 / MK 6, GM9, GM6, GM4, GM8, GM5) In this tutorial, we will see how to reset the service light on a Honda City, a very simple and quick operation. Before proceeding, you must complete…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos