Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Honda City?

Model: Honda City MK 6, GM9, GM6, GM4, GM8, GM5 - Years 2014-2023
Part: Service warning light

In this tutorial, we will see how to reset the service light on a Honda City, a very simple and quick operation. Before proceeding, you must complete all required maintenance tasks. Start by inserting the key and turning it to the first position, then press and hold the long button located on the right side of the dashboard, just above the speedometer, while simultaneously turning the key to the second position. At this point, continue holding the button until the service light goes off completely. To verify that the procedure was successful, you can restart the ignition.

Updated on 23 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tire Warning Light on a Honda City?
How to Reset the Tire Warning Light on a Honda City?
Honda City (2014-2023 / MK 6, GM9, GM6, GM4, GM8, GM5) In this tutorial, you will see how to reset the tire warning light on a Honda City. This operation is extremely simple and quick, and should be done …
How to Perform the Service Reset on Honda City
How to Perform the Service Reset on Honda City
Honda City (2014-2023 / MK 6, GM9, GM6, GM4, GM8, GM5) In this video tutorial, you will see how to reset the maintenance light on the Honda City. First, perform maintenance on the vehicle, such as changin…
How to Reset the Tire Light on a Honda City?
How to Reset the Tire Light on a Honda City?
Honda City (2014-2023 / MK 6, GM9, GM6, GM4, GM8, GM5) In this tutorial, you will learn how to reset the tire light on a Honda City. This operation is extremely simple and quick, and should only be perfor…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos