Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform the Service Reset on Honda City

Model: Honda City MK 6, GM9, GM6, GM4, GM8, GM5 - Years 2014-2023
Part: Warning light – error code

In this video tutorial, you will see how to reset the maintenance light on the Honda City. First, perform maintenance on the vehicle, such as changing the engine oil and filters; after completing the maintenance, get in your car and press the ignition button once. When the cluster is on, it will indicate that maintenance is required. To reset the service light, turn off the cluster and hold down the button at the top right of the speedometer. At the same time, turn on the cluster and continue holding the button until the reset is complete.

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the TPMS light on a 2019 Honda City
How to reset the TPMS light on a 2019 Honda City
Honda City (2014-2023 / MK 6, GM9, GM6, GM4, GM8, GM5) The TPMS warning light reset, related to tire pressure, on a 2019 Honda City vehicle must be performed after completing tire maintenance. To adjust t…
How to Reset the Window of the Honda City
How to Reset the Window of the Honda City
Honda City (2008-2021 / GM3, MK 5, GM2) After maintenance, the window of the Honda City may get stuck and needs to be reset. The reset procedure is very simple and can be done independently…
How to Replace the Air Filter on a Honda City
How to Replace the Air Filter on a Honda City
Honda City (2002-2008 / GD8, GD6, GD9, GE1, GE4, GD7) In this video, you will see how to change the air filter on a Honda City. In the Honda City, the air filter box is located next to the battery. Use a…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos