Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Apply a Adhesive Spoiler on a Honda City

Model: Honda City MK 6, GM9, GM4, GM6, GM8, GM5 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Body

See other generations:
Video tutorial

This spoiler does not require drilling for installation, as it is adhesive. It costs about $100 on major e-commerce platforms and is very easy to install.

Start by thoroughly cleaning the rear hood of your Honda City, find the exact spot to place it, and use two strips of masking tape to mark the exact position. Remove the protective backing from the double-sided tape on the underside of the spoiler (if desired, you can add more in the center, it never hurts) and position it where you marked with the masking tape.

Now, finish removing the protective tape and secure it well. Remove the masking.

Perfect result.


Updated on 11 July 2026 by ScegliAuto


Related tutorials

How to install front fog lights on the Honda City
How to install front fog lights on the Honda City
Honda City (2008-2021 / GM2, GM3, MK 5) Shortly we will see the main instructions that will allow us to install the front fog lights of the Honda City. First, we open the hood of the car an…
How to Replace the Battery in a Honda City?
How to Replace the Battery in a Honda City?
Honda City (2014-2023 / MK 6, GM9, GM4, GM6, GM8, GM5) To replace the battery in a Honda City, open the hood to access the components inside the engine bay. Near the left front headlight, you will find th…
How to Replace the Radio in a Honda City?
How to Replace the Radio in a Honda City?
Honda City (2002-2008 / GD6, GD9, GD7, GD8, GE4, GE1) To replace the radio in a Honda City, start by removing the screws located at the bottom near the climate control buttons. Once these screws are remo…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos