Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Pump from a Honda HR-V Mk2

Model: Honda Hr V RU, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Fuel pump

See other generations:
Video tutorial

This guide shows how to remove the fuel pump from a Honda HR-V Mk2. The first step to extract the fuel pump is to lift the rear seat cushion and open the inspection cover of the fuel tank. At this point, disconnect the electrical power connector and the fuel lines; be cautious of any fuel spillage.

Using a special tool to unscrew the locking ring, or a screwdriver, unscrew the locking ring of the assembly and extract the pump. Be careful of any trapped fuel in the assembly and replace the part with the new element.

Reassemble everything in position and turn on the ignition a few times to properly fill the lines.


Updated on 11 July 2026 by ScegliAuto


Related tutorials

How to Locate and Understand the Fuse Assignment Diagrams for a Honda HR-V
How to Locate and Understand the Fuse Assignment Diagrams for a Honda HR-V
Honda Hr V (2016-2022 / RU, MK 2) Fuses in a Honda HR-V can be found both in the passenger compartment and in the engine bay. In the vehicle's interior, the fuse panel is located on t…
How to open the fuel door on the Honda HR-V?
How to open the fuel door on the Honda HR-V?
Honda Hr V (2016-2022 / RU, MK 2) In this tutorial, we can see how to open the fuel door on the Honda HR-V, a very simple operation that is not different from the typical procedure of…
How to reset the trip odometers on the Honda HR-V?
How to reset the trip odometers on the Honda HR-V?
Honda Hr V (2016-2022 / RU, MK 2) In this tutorial, you will see how to reset the trip odometers on the Honda HR-V, a very simple and quick operation. These odometers can be very usef…

Other guides you may be interested in

How to Activate Cruise Control on the Peugeot 3008

Today's steps will show you how to activate cruise control on the Peugeot 3008, following the instructions below. First, get into the vehicle and start the engine. To activate cruise control, you must reach a minimum speed. Then, activate cruise control using the central button on the left stalk, adjusting the speed with the buttons; use the dial to set the speed limit. Pressing the brake pedal will automatically disable the cruise control system.

Watch the video!


by ScegliAuto

More videos