Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Light in a Honda Accord?

Model: Honda Accord MK 9 - Years 2012-2017
Part:

In this tutorial, you will see how to reset the tyre light in a Honda Accord, an extremely simple and quick operation, to be performed only after restoring the correct pressure in each tyre as per the instructions in the manual. First, insert the key and turn on the ignition, then press the "Home" button on the centre console and navigate to the general settings. Next, enter the "Vehicle" section, select "TPMS Calibration" and confirm the calibration. Restart the ignition to verify that the operation was successful.

Updated on 27 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Light on the Honda Accord?
How to Reset the Tyre Light on the Honda Accord?
Honda Accord (2012-2017 / MK 9) Resetting the tyre light on the Honda Accord, as shown in this tutorial, is a very simple and quick operation. Before proceeding, ensure you have res…
How to reset the tyre light on the Honda Accord?
How to reset the tyre light on the Honda Accord?
Honda Accord (2012-2017 / MK 9) In this tutorial, you can see how to reset the tyre light on the Honda Accord, a very simple and quick operation to perform only after restoring the …
How to Reset the Tyre Warning Light on the Honda Accord?
How to Reset the Tyre Warning Light on the Honda Accord?
Honda Accord (2018-2023 / MK 10) In this tutorial, we will see how to reset the tyre warning light on the Honda Accord, a very simple and quick operation that should be done only aft…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos