Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Husaberg Fe 350
Part: Engine

In order to disassemble the Husqvarna FE 350 engine, you need to extract it from its housing located in the center of the frame, so that it is possible to proceed by loosening the screws that fix the cylinder: once this cylinder has been removed from its seat, it will be possible to proceed by widening the ring that fixes the piston to the connecting rod in order to remove it completely. Now it will be possible to detach the connecting rod from the crankshaft and access the components inside the engine block; the new spare part can then be inserted, verifying that everything works correctly.

Posted on 1 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Replace the Coolant in the Husqvarna FE 350
Replace the Coolant in the Husqvarna FE 350
Fe 350 Today, we will see in this brief and simple guide how to bleed and replace the coolant in the Husqvarna FE 350, following the instructions below. Fir…
Changing the Engine Oil and Oil Filter on the Husqvarna FE 350
Changing the Engine Oil and Oil Filter on the Husqvarna FE 350
Fe 350 In this short and simple guide, discover how to perform routine maintenance by changing the engine oil and oil filter on the Husqvarna FE 350 enduro …
How to Replace the Engine Oil and Oil Filter of the Husqvarna FE 350
How to Replace the Engine Oil and Oil Filter of the Husqvarna FE 350
Fe 350 The following instructions will show you how to perform the routine maintenance oil change on the Husqvarna FE 350 enduro motorcycle. First, place th…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos