|
Do it yourself
| |||
| ||||
|
Model: Husaberg Fs 570
You can replace the exhaust on a Husaberg FE 570 by loosening the screws on the exhaust terminal supports, which are located near the rear mudguard. Once these screws are loosened, proceed to widen the connecting clamp positioned between the exhaust and the exhaust manifold. At this point, position the new exhaust in line with the manifold: connect it with the clamp and then secure it to the supports to ensure everything functions correctly.
Posted on 11 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Fs 570
The procedure for replacing the exhaust on the Husaberg FS 570 can be carried out by loosening the screws that secure the side panel of the rear fend…
Fs 570
In order to replace the exhaust pipe of the Husaberg FS 570, you need to loosen the screws that secure the side panel of the rear fender: once this p…
Fs 570
On the Husaberg FS 570, the procedure for replacing the exhaust can be done by loosening the screws that secure the side panel of the corresponding f…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.079
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |